Home Commercial Warranty
 
Hanwha L&C Corporation (hereunder "Hanwha") warrants to the original purchaser in the U.S.
and Canada that its product HanStone™ Quartz Surfaces,shall be free from defect in material
under normal use and service, for ten (10) years from date of installation to the original purchaser.
Hanwha, at its discretion, will provide material only, to repair or replace product failures due to
manufacturing defect during the 10 years following initial installation.

The professional fabricator/installer is responsible to inspect the HanStone™ material before
fabricating and/or installing the HanStone™ product. It is also the end user's responsibility to inspect
the finished product before permanent installation. The user of HanStone™ product assumes full
liability for usage of HanStone™. This warranty applies to HanStone™ Quartz Surface product only,
for interior, commercial application(s) in North America. This warranty is non-transferable and is
void unless the product has been paid for in full

This Commercial Warranty for HanStone™ Quartz Surfaces does not cover:

  1. Failure to comply with Hanwha's recommended storage, handling, usage,
    fabrication/installation guide, and care & maintenance guidelines.
  2. Fabrication or Installation Error.
  3. Any harm, loss, injury, liability, or any expense, including, not limited to,
    labor, associated with original installation or repair or replacement.
  4. Damages caused by accidents, abuse, misuse, exposure to extreme heat,
    act of nature, job-site conditions, or structural movement.
  5. Installed HanStone™ Quartz Surface product that is removed from its
    original place of installation.
  6. Seam Appearance or Performance.
  7. Color variance or minor conditions such as stains or water spots.
  8. Materials or product produced by other manufacturers, whether or not used
    in association with HanStone™.
  9. Without limitation, any indirect, punitive, or consequential damage or loss.
  10. Any warranty or representation made on behalf of Hanwha by a third party
    without authorization by Hanwha.
No other warranties, express or implied, are made, including merchantability or fitness for a particular purpose. Except as provided herein, Hanwha is not liable for any loss or direct, incidental, or consequential damages as a result of the inability to use HanStone.

To obtain service under this warranty, first contact the source from which the HanStone™ product was originally purchased. In addition, Hanwha or its authorized agents must be permitted to inspect the HanStone™ product being claimed under this warranty, with full cooperation by the party requesting service under this warranty. For more information, please contact Hanwha Surfaces as below:

Hanwha Surfaces, a Division of MaxForma, Inc
11165 Knott Ave. Suite C
Cypress, CA 90630
Toll Free: 1-888-Hanwha-1 (1-888-426-9421)
Tel: 714-901-9410
Fax: 714-901-5138
info@hanwhasurfaces.com